C-clamp

The C-clamp will open an inch and half or so.

Final tightening is done by turning the spindle, as with a C-clamp.

The image looked like a cross between a geared fishing tackle and a C-clamp.

Sandwich the hose between two blocks of wood and tighten with a C-clamp.

It can be mounted permanently on a countertop or secured with a C-clamp.

Used for attaching Stage lighting instrument or other fixture to the c-clamp.

One form of this capo is effectively a rubber-covered bar built into a C-clamp.

A fast-action bar clamp is larger than a C-clamp, even though the jaw opening may be the same.

The original vinyl pressing also featured a photo depicting an egg being held in a C-clamp.

An alternative is a clamp-pod, which is a ball head attached to a C-clamp.

Quinn kicked it aside and dropped to his knees, grabbing the girl's arm with a grip like a C-clamp.

Cut the pipe with a hacksaw or a tubing cutter, a tool resembling a C-clamp.

In stagecraft, a c-clamp can refer to a number of different pieces of hardware, depending on its intended use.

The F-clamp is similar to a C-clamp in use, but has a wider opening capacity (throat).

Legs are commonly attached to platforms via c-clamp before they are fastened together using a more permanent method (i.e. bolts).

C-Clamp was an indie rock band from Chicago, by way of Urbana-Champaign, Illinois.

At one point, Moomey clamps a four-inch-square piece of thick plexiglass in a C-clamp and orders the crew to fire up the laser.

Leo rechecked the tightness of every C-clamp personally, then jetted back a few meters in his worksuit to give his efforts one last visual inspection.

Cords may be held in place using a C-clamp, straight pins, T-pins, U-pins, or upholstery pins.

Wood clamps come in a wide range of sizes and styles, including the well-known C-clamp and the long bar clamps used by cabinetmakers and carpenters.

The open end of the clamp is then placed over the batten, and a bolt (the "clamp bolt") is tightened to secure the c-clamp.

The insert unfolds to show the image of the egg in the C-clamp, which has a thin red border around it and credits the image to Deborah Samuel.

A C-clamp is a type of clamp device typically used to hold a wood or metal workpiece, and often used in, but are not limited to, carpentry and welding.

Then have a helper hold the door in the raised position while unfastening the cable or install a C-clamp on one or both tracks just below the door to secure it.