mild steel

Armor plate felt no different from mild steel under his palm.

To replace it, one of the mild steel prototypes was used.

The basic stock is a long coil of mild steel.

The result was about as strong as carbon or mild steel.

The hull was made of 10mm mild steel plate.

The company has tried to cut mild steel 12 mm thick, but the finish was very rough.

"It goes through quarter-inch mild steel without giving much notice."

The tin bar could be wrought iron or mild steel.

This could be slightly reduced when wrought iron or mild steel was used.

The mild steel prototype was ready in February 1944 and entered trials.

A commercial mild steel strains elastically about 0.15 per cent.

The calculated average industry grade mild steel density is 7.85 gm/cm3.

Mild steel is also used in construction as structural steel.

Mild steel is steel with a low percentage of carbon.

Built 1976: Have 2 doors and using mild steel body types

Two are made of small blocks of mild steel.

Mild steel has a maximum limit of 0.2% carbon.

It is made from 50mm mild steel and stands 5.2m high, 15.1m wide and 13.7m deep.

Mild steel also expands under heat which may damage the welds over time.

Cast iron, mild steel and plastic have good ratings.

Instead, mild steel is produced from a bessemer converter or by other means.

This attacks mild steel and concrete materials resulting in "rot out".

Mild steel can be used for moderate vacuums above 10 torr.

Iron, mild steel and nickel are next in difficulty.

In general, the properties of malleable cast iron are more like mild steel.