backsaw

A backsaw is the most common kind of saw used for this operation.

For general use buy a backsaw with at least 15 teeth per inch.

Use the backsaw to remove the corners on the bottom piece.

Choose a backsaw according to the number of teeth per inch on the blade.

The work of a backsaw requires a thin, stiff blade.

Dovetail saw - a small backsaw used to cut dovetails.

Step 2: Cut through the board on each side of the damaged area, using a backsaw or a hacksaw.

Drive wedges under the board to raise it away from the wall, then use a backsaw to make cuts on either side of the damage.

The backsaw cannot cut completely through the damaged siding because the top will be covered by an overlapping board.

By custom, a backsaw is the type of handsaw used for mitering.

Use a backsaw and miter box for this.

For the actual cutting, a backsaw - a special saw similar to the one shown here - is the best type of saw to use.

For both woods you can also use a Japanese backsaw called a dozuki saw.

A backsaw is often used in combination with a mitre box to produce angled cuts.

Compact saw such as Japanese style backsaw with coarse teeth (folding models available).

For cutting hardwood molding that will be stained, use a backsaw having at least 20 teeth an inch.

A backsaw is used for making angle cuts and for trimming molding.

Tenon saw, Is a midsized backsaw used to cut wood in a vise.

To cut smoothly, use a backsaw.

Bench hooks are used with hand tools such as the backsaw, hand plane and chisel.

A backsaw with about 15 teeth an inch is adequate for cutting softwood molding that will be painted.

If you're adventurous, you can also use a Japanese backsaw called a dozuki saw for either type of wood.

Use a backsaw or a regular handsaw to produce a slot about one-sixteenth of an inch wide.

Traditionally, a backsaw is used.

The mitre saw combines the features of a mitre box with a backsaw.