braze

Small mechanical parts are often soldered or brazed as well.

After brazing, each frame is hand filed and aligned on a digital alignment table.

Another disadvantage is that brazed joints can be damaged under high service temperatures.

Uncoated tips brazed to their shanks were the first form.

A fuze adapter is screwed into the body and brazed in place.

"On the original, the caps were brazed chromed steel," he said.

Common hot work processes are welding, soldering, cutting and brazing.

A collection of 20-mm copper plumbing pipe, brazed together.

The parts can then be soldered or brazed conventionally.

Can be machined, brazed, formed, cut with available processes.

The metal is shaped against hard surfaces, brazed, soldered and buffed.

Joins were soldered or brazed (though in some pieces, the wire was woven).

Some other advantages include: low unit cost when used in mass production, close temperature control, and the ability to braze multiple joints at once.

Our shields were covered, our armour brazed, and smeared with dark oil.

Lowering his mask he began brazing a section of brass rod into a cuff bracelet.

Larger commercial versions use gaskets between the plates, smaller version tend to be brazed.

The bolt is of 3-piece construction, brazed together (head, body and bolt handle).

All gun mountings must be welded, not brazed.

I braze it with a brass rod.

Alloys that do not significantly attack the base metals are more suitable for brazing thin sections.

Well brazed joints have smooth, neat fillets and they offer good electrical conductivity.

An insert of tungsten carbide is brazed into the steel to provide the cutting edges.

The flux does not interact with the materials being brazed but serves as a barrier and oxygen interceptor.

The heads of the rivets are frequently brazed or soldered to prevent tank leaks.

The seam is brazed, using a torch and smoothed using a hammer or file.