Additional examples are adjusted to the entries in an automated way - we cannot guarantee that they are correct.
The ship was extensively damaged, with some buckling of her plates.
Then came the buckling of a long, lithe body.
Your doctor may also ask you about pain, swelling, locking, or buckling of the knee.
With a great buckling and moaning noise, the Buick was going down.
Some buckling of the main car deck resulted from the heat of the fire.
They destroyed the buckling and kept the does.
He performed pioneering work on the buckling of compressed struts.
The table below lists the geometric buckling for some common geometries.
Sun kink, a buckling of railway tracks caused by high temperature.
The result was extensive buckling of the framework.
Cooling off a unit after use required precautions to prevent buckling of the main shaft.
The top layer is asphalt shingles, dried out and brittle, with some buckling.
However, even a buckling of one ten thousandth of an inch would be critical.
He heard the crash of the violent impact, the buckling and ripping of metal.
The collision caused a 15-foot hole above the waterline and buckling of the car deck doors.
The geometric buckling is an eigenvalue problem that can be solved for different geometries.
Accordingly, it was considered desirable to provide the designer with more information on the buckling of curved sheet than has been available in the past.
Here, the original hatch was still present, but the buckling of the walls left openings that let the team pry it open and slip inside.
These features represent buckling of the surface and form long ridges across parts of the maria.
The buckling of the land thrust up great mountain ranges in the central part of the northern continent.
The behavior seems to be analogous to the buckling of sheets of rock under pressure over geological time periods.
Because the book is quite rigid at the freeze-drying temperatures, it is hard to prevent the buckling.
This avoids both cave-ins and a buckling of the side walls from the weight of the cover.
The buckling of thin cylindrical shells under axial compression.
It was necessary to establish some minimum requirements and laws to control the buckling and strength characteristics.