cartridge holder

The ink cartridge holders will move to the installation position.

Information about the ink levels and other data is exchanged when cartridge meets cartridge holder.

Typically, a refill kit comes with a cartridge holder, bottles of ink and needles.

The new Clear Cartridge Holder twist-locks in place with a more definite fit.

The new Clear Cartridge Holder offers significant advantages:

The new Clear Cartridge Holder is made from a high molecular weight plastic and has a more robust design to prevent breakage.

Russian troops, however, did have various cartridge holders, such as the Krnka quick-loader, attached to their rifles to aid in reloading.

If you use a HumaPen Ergo and it has a clear insulin cartridge holder, you don't need to do anything.

(Older HumaPen® Ergo cartridge holders were made of a nontransparent blue plastic and susceptible to breakage).

During the past year, a new insulin Clear Cartridge Holder was introduced for the HumaPen® Ergo.

The new Clear Cartridge Holder design creates an improved snug fit for the cap and allows for easier portability.

The cartridge holder must be locked in place to ensure the proper functioning of the pen and precise delivery of the desired dose of insulin.

This new Clear Cartridge Holder was designed to improve the functionality and strength of the HumaPen® Ergo.

If you are currently using the HumaPen® Ergo and have not upgraded to the new Clear Cartridge Holder please read the following information carefully.

A. Printers these days can be awfully fussy about their ink cartridges sitting precisely in their cartridge holders, often refusing to print unless everything is just so.

Please visit your local pharmacy to obtain your FREE Clear Cartridge Holder Upgrade Kit.

Until you have replaced your old cartridge holder with the new Clear Cartridge Holder, please check for broken or damaged parts before every injection.

After you turn off the printer and remove the cartridges, gently clean the copper plates on the cartridge and contacts inside the cartridge holder to clear away any debris.

Some tools are found in all kits because they are necessary to refill, but others, like the cartridge holder or a needle to withdraw air from the cartridge, are optional.

Please refer to the "Important Notes" section of the HumaPen® Ergo instruction manual, which you received with your HumaPen® Ergo or Clear Cartridge Holder Kit.

This was black, had a tube at one end, a stock at the other, and above and below the trigger housing in the near middle, were two projectionsone up, one down, off-center from each otherthat looked like cartridge holders.

An HP Engineer told me that cheaper inks really can cause problems - apparently the electrical resistance of the ink is important and the circuitry in the cartridge holder can burn out with some cheaper inks.

Prior to the introduction of speedloaders for revolvers, reloading of revolvers was always accomplished by manually loading each cartridge into each chamber from cartridge loops on a belt or bandolier, a cartridge pouch, or other cartridge holder, such as a pocket.

He set his computer for a practice run on the taser qualification scenario, checked to make sure the spare compressed gas cartridge holder was on the left side of his belt, and then pulled the taser and inspected the weapon to make certain the cartridge in it was still active.

Please visit your local pharmacy to obtain your FREE Clear Cartridge Holder Upgrade Kit. If you have any questions or have not been able to obtain an Upgrade Kit through your pharmacy, please call the Lilly Customer Response Centre at 1-888-545-5972. 3.