center hole AmE
centre hole BrE

Falling into the center hole results in a loss of one life.

This one did not even bend over as I balanced it with my finger through the center hole.

Only a shot through the center hole allows a chance for a hole in one.

Not only that, but the center hole had been cut to take the main shaft of the mill machinery.

I used some of my displaced dirt to fill the hexagonal center hole.

Bad dreams get tangled in the webbing, good ones sneak through a small center hole.

Make five cuts, each about three-inches long, radiating from the center hole.

The wood block comes out of the box with a drilled out center hole.

The large center hole on 45s allows for easier handling by jukebox mechanisms.

Place the cake on a platter and fill the center hole with pineapple chunks.

The first player shoots for the center hole.

It was circular, with bony plates that overlapped around the center hole.

The arbor can carry a drill bit to bore a centering hole.

Still, Rennie knew she had one, possibly two, chances to thread its center hole with the spike.

The company logo is a human skull, often positioned on the label with an eye socket over the centre hole.

Dimensioning of centre line should be avoided except when it passes through centre hole.

Remove pastry dough from the mold's center hole.

Newman peered through the center hole of the little mirror and flashed it at the oncoming aircraft.

The true ground speed is determined by matching the center hole to the speed portion of the grid.

Usually made from loose beads with a center hole and connected by a piece of string or elastic band through the holes.

Working around the center hole, you have to open your mouth wide to begin to get inside to a yeasty, spongy network of pure goodness.

The center hole was reserved for the Russian hunter, who shot otters while the natives paddled.

Next measure the distance between the edge of the center hole and the center of one stud.

It supports the part by making contact with the outside diameter of the end of the part, rather than using a center hole.

The tabs are secured to the blocks by wing-like braces that fit into their center holes.

The company logo is a human skull, often positioned on the label with an eye socket over the centre hole.

Dimensioning of centre line should be avoided except when it passes through centre hole.

Because these were similar in size to the silver 10 and 20 centavo coins, some were officially punched with a centre hole.

The load forces were taken by the centre hole in the wheel resting on the flange on the end of the axle.

Some were shaped from hollowed bones, left tubular, presumably so that the cord could be drawn through the centre hole.

A wooden rod was placed through the centre hole of a whorl or disc made of wood or stone.

In later years, paper labels served another function: they acted like gaskets, preventing molten material from getting into the mechanism for punching the centre hole.

Another logo of a stylized gas mask with headphones, is used on some CD releases, usually positioned with the mouth over the centre hole.

In many classical sites, sectioned columns were carved with a centre hole or depression so that they could be pegged together, using stone or metal pins.

The thin plates, with holes corresponding to the centre hole in a big grain of the hexagonal powder, will, I hope, cause the stuff to burn quickly, and give a tremendous pressure.

The newly made wooden wheel - the hub of elm, the spokes and rim of ash - was laid on the plate, the hub fitting snugly into the centre hole.

The fact that the "centre hole" in some of the master recordings had not been in the true middle of the master disc meant that there were wide variations in tone, pitch, key and phrasing, as commercially released records revolved around the spindle.

Center drills are available with two different included angles; 60 degrees is the standard for drilling centre holes (for example for subsequent centre support in the lathe), but 90 degrees is also common and used when locating holes prior to drilling with twist drills.

The single also includes the "Cousin Mike" video for "The Ballad Of Chasey Lain" and has track 6 listed as "Tic Tac Toe - Remus Pops Jefferson Game" which is a tic-tac-toe board design on the CD itself, with the centre hole representing the first move.