centre lathe BrE
center lathe AmE

Injured whilst using a large centre lathe when glove caught on chuck jaw.

A centre lathe makes a poor milling machine for lack of a vertical feed to the crosslide or work table.

Dean Smith & Grace centre lathe.

The bed of a toolroom lathe is generally wider than that of a standard centre lathe.

Demonstration of centre lathe - facing off, centre drill, drill and centre bore hole.

The most significant engineering company in the region is supposedly Škoda Machine Tool a.s. producing for example milling and boring machines, centre lathes, turntables, etc.

This follows on from the recently installed Hwacheon HL380 x 1000 general purpose centre lathe complete with digital readout for higher production of the smaller jobbing type work.

A recognition of the need to keep his workshop staff motivated and challenged has been the driving force behind a Brisbane engineering firm switching from centre lathes to CNC technology.

Centre lathes capable of turning diameters up to 2m and lengths of 3m, complete with digital readout, taper turning, spherical turning and tool post milling attachments.

We also have all types of Capstan Lathes, Centre Lathes, Automatic Lathes, Center Lathes, etc.

"I believe, after a while, fitters and turners get absolutely sick of using centre lathes so we evaluated options that would progress them towards full automation without scaring them with sophistication.

I suggested that a lathe might be useful, so Andy took me on a scrounging trip on a dilly and we returned with a 4.5 inch centre lathe from a 'mothballed' shop.

Harry Edward Ashthorpe, Centre Lathe Turner, K & L Steel Founders & Engineers Ltd., Letchworth.

It's good to know that a British firm (in this case the largest producers of centre lathes in the world) will be able to supply the technology needed to build automatic production lines (this issue, p 632).

Our Jobbing Section utilises 2 Italian Ursas AC centre lathes, along with 2 general purpose centre lathes and a Bridgeport milling machine.

He began a career as a turner, becoming an apprentice centre lathe turner in 1962, and later becoming works convenor for the Amalgamated Engineering and Electrical Union at Beloit Walmsleys Ltd, Bolton.

A centre lathe has applications anywhere that a centered workpiece may be used; this is not limited to lathe usage but may include setups in dividing heads, cylindrical grinders, tool and cutter grinders or other related equipment.

He began a career as a turner, becoming an apprentice centre lathe (tool) turner in 1962, leaving the profession in 1978 to take up the position of convenor at the Amalgamated Engineering and Electrical Union, in which position he remained until his election to the British House of Commons.

Injured whilst using a large centre lathe when glove caught on chuck jaw.

A centre lathe makes a poor milling machine for lack of a vertical feed to the crosslide or work table.

Dean Smith & Grace centre lathe.

The bed of a toolroom lathe is generally wider than that of a standard centre lathe.

Demonstration of centre lathe - facing off, centre drill, drill and centre bore hole.

Mini-lathes and micro-lathes are miniature versions of a general-purpose center lathe (engine lathe).

In any case, because of their fully ticked-off option list and (real or implied) higher quality, toolroom lathes are more expensive than entry-level center lathes.

The most significant engineering company in the region is supposedly Škoda Machine Tool a.s. producing for example milling and boring machines, centre lathes, turntables, etc.

This follows on from the recently installed Hwacheon HL380 x 1000 general purpose centre lathe complete with digital readout for higher production of the smaller jobbing type work.

The construction of a center lathe is detailed above, but depending on the year of manufacture, size, price range or desired features, even these lathes can vary widely between models.

A recognition of the need to keep his workshop staff motivated and challenged has been the driving force behind a Brisbane engineering firm switching from centre lathes to CNC technology.

Centre lathes capable of turning diameters up to 2m and lengths of 3m, complete with digital readout, taper turning, spherical turning and tool post milling attachments.

For example, a centering lathe is a dual head machine where the work remains fixed and the heads move towards the workpiece and machine a center drill hole into each end.

"I believe, after a while, fitters and turners get absolutely sick of using centre lathes so we evaluated options that would progress them towards full automation without scaring them with sophistication.

It is essentially just a top-of-the-line center lathe, with all of the best optional features that may be omitted from less expensive models, such as a collet closer, taper attachment, and others.

I suggested that a lathe might be useful, so Andy took me on a scrounging trip on a dilly and we returned with a 4.5 inch centre lathe from a 'mothballed' shop.

Harry Edward Ashthorpe, Centre Lathe Turner, K & L Steel Founders & Engineers Ltd., Letchworth.

We also have all types of Capstan Lathes, Centre Lathes, Automatic Lathes, Center Lathes, etc.

It's good to know that a British firm (in this case the largest producers of centre lathes in the world) will be able to supply the technology needed to build automatic production lines (this issue, p 632).

Our Jobbing Section utilises 2 Italian Ursas AC centre lathes, along with 2 general purpose centre lathes and a Bridgeport milling machine.

He began a career as a turner, becoming an apprentice centre lathe turner in 1962, and later becoming works convenor for the Amalgamated Engineering and Electrical Union at Beloit Walmsleys Ltd, Bolton.

A centre lathe has applications anywhere that a centered workpiece may be used; this is not limited to lathe usage but may include setups in dividing heads, cylindrical grinders, tool and cutter grinders or other related equipment.

The terms center lathe, engine lathe, and bench lathe all refer to a basic type of lathe that may be considered the archetypical class of metalworking lathe most often used by the general machinist or machining hobbyist.

In other cases, especially when comparing different brands, the quality differential between (1) an entry-level center lathe built to compete on price, and (2) a toolroom lathe meant to compete only on quality and not on price, can be objectively demonstrated by measuring TIR, vibration, etc.

He began a career as a turner, becoming an apprentice centre lathe (tool) turner in 1962, leaving the profession in 1978 to take up the position of convenor at the Amalgamated Engineering and Electrical Union, in which position he remained until his election to the British House of Commons.