combustion efficiency

They need to have a relatively low water content for combustion efficiency.

Increased combustion efficiency also means better fuel economy and reduced emissions.

The activities affect the combustion efficiency of five low pressure boilers.

Does this affect combustion efficiency by more than 5%?

On top of that, fuel costs are hugely reduced by the high combustion efficiency.

An aft mixer may be used to improve combustion efficiency.

As with an oil furnace, you can request instrument testing for combustion efficiency.

One way to determine a system's combustion efficiency is to hire an independent auditor.

Although a lower compression ratio generally lowers combustion efficiency and costs power.

The minimum combustion efficiency that must be achieved by incinerators is 99.9%.

Also, while research is underway, the combustion efficiencies of flares are not currently known.

And that means more power and higher combustion efficiency.

Conventional units produce combustion efficiencies of about 80 percent.

Air injection system designed into heads maintains optimum combustion efficiency.

This gauge measured the combustion efficiency of the engine.

Increasing the combustion efficiency of an engine increases the exhaust oxygen percentage.

The cooling and condensing of intake air improves engine combustion efficiency.

In general, high combustion efficiency will be used in the flaring (target 98%).

Natural gas has different combustion efficiency curves linked to the temperature of the gases and the excess air.

Marathon has already spent about $45 million on equipment to improve combustion efficiency and plans to spend an additional $6.5 million, according to the statement.

The environmental agency estimates Marathon has spent about $50 million in costs tied to improving the combustion efficiency of its flares.

Low combustion efficiency also results in a visible plume that is aesthetically objectionable.

Engine performance is enhanced due to a significant increase in combustion efficiency created by the extra air flow of the multi-valve system.

It is important however, to ensure that both burners and boilers are running at peak combustion efficiency.

This compensation keeps combustion efficiency constant and maintains production efficiency.