crack resistance

Maximum crack resistance and strength is achieved at about this level.

It can be used to make thinner films, with better environmental stress cracking resistance.

Curves from bending tests look similar to those of the crack resistance measurements shown above.

In particular, we provide on-site services and weld-repair procedures that increase cracking resistance.

High ferrite levels that provide excellent stress corrosion cracking resistance.

High quality acrylics can provide a longer term durability, colour stability, and crack resistance compared to polymer cement finishes.

Stress cracking resistance is better than that of HDPE.

Chemical: stress crack resistance, etc.

The primary quality criterion for CMCs is the crack resistance behaviour or fracture toughness.

However, at "This Old House" website, this assertion about thickness and crack resistance is disputed.

Cross Link Resin is mainly used where outstanding stress crack resistance to oil based products such as petrol or diesel is required.

When it's employed in actual regulator designs, the Venturi effect doesn't change the cracking resistance but improves the flow once it's flowing!

Mechanical properties of materials include the yield strength, tensile strength, fatigue strength, crack resistance, and other characteristics.

The production of CMC material with high crack resistance requires a step to weaken this bond between the fibres and matrix.

Addition of steel fibers into the concrete improves the crack resistance (or ductility) capacity of the concrete.

The recycled material is cleaned, ground and recompounded into uniform pellets along with prime virgin material especially designed to build up environmental stress crack resistance.

Advantages: SMA mixtures provide both excellent rut resistance and crack resistance.

It is available as a 35-mesh powder and offers exceptional stress crack resistance and excellent adhesion to metals and selected polymers.

A plot of R versus crack extension is called a crack resistance curve, or R curve.

Other features include: excellent crack resistance, water & carbon dioxide impermeability, low dirt pick-up, same day re-coat an water clean-up.

To increase the crack resistance or fracture toughness, particles (so-called monocrystalline whiskers or platelets) were embedded into the matrix.

Lower thickness (gauge) films can be blown, compared with LDPE, with better environmental stress cracking resistance but is not as easy to process.

Also available new modified PVC (PVC-M) with improved crack resistance.

Elasticity:Excellent resists long term hardening /embrittlement maintains long term grain crack resistance.

Its properties include high heat deflection temperature, good impact resistance, chemical resistance, low flexural modulus and good environmental stress crack resistance.