die casting
die-casting

It is the largest die casting factory in the world.

The main disadvantage to die casting is the very high capital cost.

Therefore to make die casting an economic process a large production volume is needed.

One example is in die casting or injection molding processes.

Some specialized processes, such as die casting, use additional terminology.

The main failure mode for die casting dies is wear or erosion.

GM first used the machine for die casting handling and spot welding.

Die casting technology was developed in the United States in 1920.

Now, as domestic valve production expands, the needed die castings must be imported.

"There's no more die casting in the city, so I don't know what I'm going to do."

It is used for die casting and rapid prototyping.

The valve manufacturers helped put them out of business by purchasing die castings overseas.

Die casting allows for one single, light-weight body that is more economical to produce and use.

By the 1950's, the kibbutz went into die casting.

In the standard die casting process the final casting will have a small amount of porosity.

For the process of casting dies with molten metal, see die casting.

In die casting the most common defects are misruns and cold shuts.

They are designed to meet the requirements of zinc die casting and plastic injection molding dies.

In a traditional die casting process these alloys would solder to the die.

As a result, Bühler started designing and constructing its own die casting machines.

We're not selling a product but the Dynacast engineering process of die casting."

The company specialized in machine die casting and made small parts such as gears and bearing caps.

It is generally more expensive per unit than die casting or sand casting, but has lower equipment costs.

The 1960 Valiant exemplified Chrysler's leadership in aluminum die casting.

Manufacture of parts using die casting is relatively simple, involving only four main steps, which keeps the incremental cost per item low.