diverter

And don't anyone forget to turn on the light-wave diverter.

When your spout is placed, you can choose where you'd then like to place the diverter.

There is a diverter flap in the ventilation system for this.

Anyone who calls the junkyard number activates the call diverter I have set up.

I'm going to switch on the light-wave diverter and have another look."

During April 2012 a diverter assembly was installed around the G4 well head.

A diverter at the top of the elevator allows the grain to be sent to the chosen bin.

The diverter might leak along the stem for a few minutes but should stop when the packing swells.

Check for deposits or roughness between the diverter's plunger and its seat.

If the diverter has been dripping, giving the packing nut a tightening turn might solve the problem.

One interesting and particularly rare attachment, called a "diverter", spreads shot vertically or horizontally.

Automatic diverter system, a condenser coil, some transformers and you've got power to the whole community.

His "quickcharge" battery recharger was based on a diverter pole generator.

By the way, can you install a power diverter from the screens and grav fields to the drives?"

It owes its effectiveness to a patented twin-nozzle diverter and clever bowl design.

The diverter directs water through the sprayer hose when the sprayer is used.

Reinstall the cleaned diverter valve (with a new O-ring) if there is one, or a replacement.

Rotary switch turns, breaking one connection and supplying load current through diverter resistor A.

Rear plastic hyrda block and upgraded diverter valve.

In a resistance type tap changer, the changeover must be made rapidly to avoid overheating of the diverter.

Thus a diverter valve must be employed to vent turbocharger air until it has reached the pressure in the intake manifold.

At the Shaker Heights City Hall, the structure is known a "traffic diverter."

To remove a push-pull diverter mounted in the wall, unscrew it with channel-type pliers.

Replace the O-rings, then reinstall the diverter after wrapping the threads with sealing tape, as described above.