edge joint

The use of edge joints is limited, and end joints are not allowed.

Inspect subfloor end and edge joints for unevenness and variation in thickness.

Matchboard was most popular in the late Victorian period, when woodworking machinery had developed that could cut the edge joints quickly and cheaply.

The edge joints of matchboard are more waterproof than a crude butt joint and they also act to stabilise the board edges against warping.

Purfling can also appear on the back of an acoustic guitar, marking the edge joints of the two or three sections of the back.

The five basic types of weld joints are the butt joint, lap joint, corner joint, edge joint, and T-joint (a variant of this last is the cruciform joint).

Core Veneers - Core veneers have the same basic requirements as face veneers, except that small splits are allowed, and there is no limit on the number of pin knots or edge joints.

If unavoidable, sheets can be butted on framing members and taped and jointed in the same manner as described for recessed edge joints, but applying the Total Joint Finish over the joints in coats up to 600mm in width.

Auto-Sleepers core product developed through the adoption of the successful monocoque body, a two-piece clamshell glass-fibre unit which gave the living unit strength and a lack of edge joints, which on a traditional sandwich construction produce a weaker body which is prone to leaking.