feed screw

The material is fed continuously by a feed screw.

A special reproducer and modified feed screw mechanism were required to play them.

Our modular Quick Change feed screw drive system is adaptable to most applications.

Obviously, as the cylinder was turned, the needle followed a spiral path whose pitch depended upon that of the feed screw.

With a feed screw made of delrin, the valve is designed for use with two-compound and abrasive materials.

The slide rest has a silky smooth feel when in good condition due to accurate machining and ball bearing pillow blocks for the feed screws.

Discrete control of the forward and reverse rotations of the feed screw controls the amount of material discharged.

The pellet stove typically uses a feed screw to transfer pellets from a storage hopper to a combustion chamber.

Plastics extrusion commonly uses plastic chips or pellets, which are usually dried, to drive out moisture, in a hopper before going to the feed screw.

The UO in the reduction furnace passed through a seal hopper and a feed screw to the first of the three hydrofluorination furnaces.

A variable speed electronic closed loop drive system is connected to the motor and in turn the feed screw to provide a controlled rate of powder feed to the pistol.

BD provides its customers with a high quality assortment of precision manufactured feed screws, all of which are designed to meet the most demanding needs in the bottling industry today.

The speed of the feed screw is controlled through a closed loop control system and thereby maintains an extremely accurate and consistent feed rate wich is easily reproduced.

Roger Puar, Abitibi-Consolidated, Mackenzie - Steam separators and side entry feed screws have reduced fibre carryover in 68" Hymac refiners.

The solids and liquids to be mixed are first drawn into the machine by a feed screw, which then narrows so as to compress the material before moving it into the rotor-stator mixing zone.

Dear Scott, It is possible to add infeed indicators to an express Dual It involves changing part of the feed column/feed screw assembly, but is a relatively simple task to carry out.

While large manufacturers are still found mostly in red-brick urban industrial districts and along interstates, small factories are everywhere in New Jersey, hiding in plain sight in office parks and along two-lane roads, churning out everything from felt to feed screws to frozen hors d'oeuvres.