ferrous alloy

Regular ferrous alloys are the most common due to price and availability.

The term is often used for ferrous alloys that have been austenitised and then cooled in open air.

The most common materials are ferrous alloys but may also span to stainless steels.

Now it was observed that the object was made from ferrous alloys of an extremely simple type.

In ferrous alloys, uranium increases the elastic limit and the tensile strength.

Ferrous alloys are usually either "full annealed" or "process annealed."

Take the ferrous alloy plant.

The Round Table sends for the director of the industrial combine responsible for the ferrous alloy factory.

"A ferrous alloy, J think," Ilitu said at length.

An example is diffusion of aluminium from aluminium bronze to a ferrous alloy when joining these.

Ferrous alloys.

About 38 percent of British Steel's purchases are priced in dollars, notably coal, iron ore and ferrous alloy.

Quench hardening is generally applicable to some ferrous alloys, but not copper alloys.

Cinnamaldehyde is also known as a corrosion inhibitor for steel and other ferrous alloys in corrosive fluids.

Normalization is an annealing process applied to ferrous alloys to give the material a uniform fine grained structure and make it less brittle.

Ferrosilicon is used as a source of silicon to reduce metals from their oxides and to deoxidize steel and other ferrous alloys.

In ferrous alloys, this will often produce a harder metal, while non-ferrous alloys will usually become softer than normal.

Ferrous alloys and titanium alloys have a distinct limit, an amplitude below which there appears to be no number of cycles that will cause failure.

The phosphoric acid content helps to passivate ferrous alloys against corrosion by the dilute nitric acid.

Cast iron is iron or a ferrous alloy which has been heated until it liquefies, and is then poured into a mould to solidify.

All kinds of steel contain some amount of carbon, by definition, and all ferrous alloys contain some carbon.

Apex seals were made of a special material known as Ferro Tic, which was a combination of sintered ferrous alloy and titanium carbide.

For example, bauxite is used as flux for blast furnaces, while others such as wolframite, pyrolusite and chromite are used in making ferrous alloys.

Tempering is a heat treatment technique applied to ferrous alloys, such as steel or cast iron, to achieve greater toughness by decreasing the hardness of the alloy.

In ferrous alloys, annealing is usually accomplished by heating the metal beyond the upper critical temperature and then cooling very slowly, resulting in the formation of pearlite.