field coil

I'm turning on the field coils in exactly 2 minutes.

Anything you can do to fix the field coils in a hurry?

The outer field coils draw their power from the grid.

His right went between the field coils and into the negatron stream.

With two suction cups he fixed a field coil over the area.

Some older or simpler arrangements use a single field coil with a pole at each end.

Examine the field coils and the connections between them.

We know that the entire station functions as a subspace field coil.

Provide power to the poloidal field coils for plasma position and shape control.

Toroidal field coils can also be used to control the magnetic surface characteristics.

The horizontal position of the plasma is controlled by the vertical field coils.

I bought additional field coils so that each brush works from its own coil assembly.

Most of these used a single transverse field coil mounted above the rotor.

The field coils are connected in series or parallel with the armature winding.

Both dynamos and alternators required a source of power to drive their field coils.

The sense coil, another loop antenna, is placed in the area between the field coils.

Multiple taps on the field coil provide (imprecise) stepped speed control.

This field may be generated by either a permanent magnet or a field coil.

The area between the two field coils is filled with an analog of the original signal from the antennae.

This magnetic field can come from a permanent magnet or field coils.

Most arrangements use one field coil per pole.

Owing to their additional cost and complexity, motors with field coils have only rarely been used for models.

The output of each was sent to its own looped wire, or as they are referred to in this system, a "field coil".

The 18 toroidal field coils will also use niobium-tin.