flat spring

Over the flat spring countryside, the Union forces were stopped at the rivers edge.

If the actuator is released this will move the flat spring upward.

A fulcrum is near the midpoint of the flat spring.

As the flat spring moves, the force from the curved spring increases.

The handles end in flat springs connected with a pivot joint.

A flat spring is much like a coil spring, but thinner.

A long flat spring is hinged at one end of the switch (the left, in the photograph) and has electrical contacts on the other.

Because the flat spring is anchored and strong in tension the curved spring cannot move it to the right.

Walter solved this problem by mounting a long flat spring between the check and the action frame at the treble end.

Flat spring diaphragms may also be inserted with an introducer for women uncomfortable using their hands.

An actuator nub presses on the flat spring near its hinge point.

The vibrato system uses a flat spring allowing the user to easily adjust the tension.

The B thumb keys typically have flat springs.

The arrangement works like a flat spring: when it is stretched, the spring opens up without the wires breaking.

The curved spring presses, or pulls, the flat spring upward, that is away, from the anchor point.

Willis straightened, holding a flat spring.

Damper: This is the term used for the flat spring used in some single or dual spring applications.

Flat spring - this type is made of a flat or conical shaped piece of metal.

Leaf spring - a flat spring used in vehicle suspensions, electrical switches, and bows.

Owing to the geometry, the upward force is proportional to the displacement which decreases as the flat spring moves downward.

Even though the flat spring unflexes as it moves downward, the switch is designed so the net effect is acceleration.

The gun was revolutionary at its time for its use of coil springs as opposed to flat springs.

When the flat spring is flexed enough it will provide sufficient force to compress the curved spring and the contacts will begin to move.

Either sinuous tension flat springs or coil springs are used in the backs of our models for lumber support, comfort and durability.