These were cut with enough precision not to need any further machining.

The grain size may be different based on the machining.

Most of the machining will have to be done here on the island now."

And because they can also be formed very close to their final size, little additional machining is needed.

However, most of the machining was done by studio technicians.

But it would call for perfect machining and surface polish.

The machining room has seven staff employed full time including a supervisor.

This means less wear on the tools and easier machining.

The machine tool is given little or no information about the desired result of the machining.

For the machining of complex shapes, it is common to use form tools.

The machining of the metal similar to stainless steel was well under way.

It is especially recommended for high speed machining of cast iron.

Decreasing the tolerances in the machining has taken care of that.

These steps are done prior to any final machining.

This problem is exacerbated by the sharp machining found on many firearms.

For example, an area of excess metal may be left because it is needed to complete subsequent machining.

Machining can be a business, a hobby, or both.

The new fork has been cast, and is at February 2013 awaiting machining.

In practice I can't do machining of that quality.

Amount of work is reduced, if the piece would otherwise have to be turned manually during the machining.

Machining is the most effective for reproducibility and mass production of parts.

As a result, abrasive machining is less power efficient and generates more heat.

Besides ordinary machining, no external techniques or equipment are used in its production.

They have also found their way into shops where light capacity machining is required such as small engine repair.

Most of the time, carbide will leave a better finish on the part, and allow faster machining.

They think I only have oil, like a machine or something.

The machine can then right itself and take off again.

Or maybe she would not use the time machine at all.

He left me in a room with a large machine.

My head is too old to deal with a machine.

Where is he likely to use the machine the most?

Are we about to be taken over by the machine?

"But someone or something would have had to program the machine."

The three of them went back to work on the machine.

What if his machine did not work against the new force?

He got down from the machine and went back to his car.

He has no time to be anything but a machine.

Get away from the machine and let me talk to him.

They've got a feel for the machine from the very first.

I turned back to my machine and got to work again.

She heard him move, but the machine was not turned off.

The new machine is still in development, the company said.

Then they want to make sure you're not a machine.

Maybe the machine was turned off and then back on.

I mean, they probably all do have their own machine now.

Parents give life, something a machine such as I cannot do.

First we had to figure out how to turn the machine on.

They seemed to be talking to some kind of machine.

Just for a second to get the feel of the machine.

I'm a good little machine and I love my work.

The tip of the hook was machined to a point.

Where necessary new parts are being machined by her owner.

It is not uncommon for other materials to be machined.

The first shell was completely machined on 18 August 1942.

The group was then taken behind the police station where they were machined gunned.

At the time I machined those controls, one theory seemed proved.

Doesn't sound much, but over 350 pieces had to be fabricated and machined.

The new test part was a gear box that must be machined on all six sides.

Later model years featured keys machined on the right front of each web.

If all the parts of an airplane engine are machined 1mm off, it's just not going to work.

But, as such things went, both cameras were modern and elegantly machined.

A through hole is usually machined into the table.

The outside of the bar is machined to shape (turning operation).

The slide had been machined to take the silencer by someone who knew his business.

The Model 1877 no longer had the arch machined out of it, though the reason for this modification is not clear.

The block is machined from a piece of forged aluminum.

Must have been machined imprecisely, he thought, or maybe my bit's worn down.

The three cross tails were machined for an accurate assembly.

The teeth of the grinder are machined to cut the spice.

A draughtsman makes proper drawings of the part to be machined.

The crankcase was machined from a solid piece of steel.

An opening is machined into the surface of the mold on the parting line.

Alternatively, they can be machined in the shape of die or punch.

It was common for the slabs of the mineral to be machined to fit.