Additional examples are adjusted to the entries in an automated way - we cannot guarantee that they are correct.
The gender of the other side is dependent on the mating connector going to the computer.
A 2m long output cable with mating connector is supplied.
Cable assemblies with mating connectors were also readily available.
Every new unit is shipped with the mating connector - make sure that you did not throw it away with the packaging.
Depth: 160mm excluding mating connectors.
Mating connectors were machined pairs of brass blocks with clamping screws, attached to flying leads (free hanging).
The threaded-head type can be used to panel-mount one connector and provide a means to attach the mating connector to the first connector.
The Data Express units are ruggedly constructed and employ highly-reliable mating connectors between the drive carrier and receiving frame.
These types of connectors are not strictly speaking hermaphroditic, since mating connectors are not freely interchangeable.
Certain styles of blind mate RF connectors feature a detent or undercut to allow for the mating connector to snap into, improving retention.
At the "back" of each card is one or more connectors, which plug into mating connectors on a backplane that closes the rear of the subrack.
In electrical and mechanical trades and manufacturing, each half of a pair of mating connectors or fasteners is conventionally assigned the designation male or female.
A Brandenburg type 37 moulded output socket is fitted, and a 2 m long output cable is supplied, fitted with a mating connector.
For prototyping use, the GPS 15-W (with a different connector type on the board) comes with a mating connector with pigtailed bare wire ends.
The threaded barrel was withdrawn into the nut on one connector and extended on the other to allow the barrel to engage the nut of both mating connectors.
The intent is to define a common electric vehicle conductive charging system architecture including operational requirements and the functional and dimensional requirements for the vehicle inlet and mating connector.
These features minimize ground loops and common mode voltage problems when the I/O modules are distributed over long distance All I/O modules have two-piece mating connectors for quick connection to field wiring.