metallurgically

Metallurgically the concentrate is likely to be relatively complex.

However, it is difficult to treat metallurgically and remains a refractory ore type.

We'll compare it metallurgically after they raise the Open Lotus.

How could they be so metallurgically ignorant?

There is nothing metallurgically significant about ambient temperature.

It is well understood geologically and metallurgically.

In the new case design, particular attention was directed toward thickening and metallurgically strengthening the case's web and sidewall immediately forward of the web.

There was a 150 year period in which better and more metallurgically advanced steel armour was being used, precisely because of the danger posed by the gun.

The filler metal reacts metallurgically with the workpiece(s) and solidifies in the capillary, forming a strong joint.

Upon impact, solid particles with sufficient kinetic energy deform plastically and bond metallurgically to the substrate to form a coating.

He tilted his head, studying her as if she were some puzzle, such as two metallurgically incompatible surfaces he had to figure out how to join.

Alclading is the process of metallurgically bonding a thin layer of pure aluminium to the aluminium alloy.

Most grades of steel are melted once and are then cast or teemed into a solid form prior to extensive forging or rolling to a metallurgically sound form.

The ZMC-2 was constructed out of Alclad, corrosion resistant aluminium sheet formed from high-purity aluminium surface layers metallurgically bonded to high strength aluminium alloy core material.

Pin brazing is an easy, metallurgically safe method of making electrical connections to steel and ductile iron pipelines as well as other metallic structures, which are to be cathodically protected or electrically earthed.

In the sphalerite-dominated ore, the silver content is only about 0.015-0.02%, which was still enough to exploit and would even be at present days, given that a sufficient tonnage of metallurgically advantageous ore could be found.

This was an alumino-thermic process in which a powder 'portion' was ignited; the aluminium was the fuel and a metallurgically appropriate composition of molten steel descended into the gap between the rail ends, contained in refractory moulds.

"Squirter" type DTIs are mechanically and metallurgically identical to the standard DTIs described above, except as the protrusions of Squirter type DTIs collapse upon tightening, the cavity material is expelled to the outer diameter of the device indicating protrusion compression, i.e. bolt tension, visually.