plate nut
nut plate
anchor nut
anchor plate

Bad news, as you cannot access the bottom retainer plate nut to torque it up.

These locking plate nuts are used when the nut is subjected to constant changes in environment or to vibration.

Every unit is supplied with a complete fitting kit including instructions and hi-tensile zinc plated nuts & bolts.

All our reconditioned carbs are rebuilt using gold plated nuts, bolts, clips etc. giving them the professional touch they deserve.

Hard materials are used when nut is subjected to high stress environment.Sometimes stainless steel or nickel plated nuts are used in order to increase corrosion resistance.

A plate nut, also known as a nut plate, anchor nut or anchor plate, is a stamped sheet metal nut that is usually riveted to a workpiece.

Currant reg number 1 LCP Jason WilkesThe man who started it all back in 1988, a number plate nut who's hands on experience is second to none, Jason is a connoisseur of high quality number plates.

Six nut plates were attached to the fore/aft pieces in the area between the side pieces.

I used 3/16" screws from the outside of the aircraft feeding into nut plates on the angle piece to hold the plates in place.

I removed the hinge, made up two more hinges, riveted the nut plates onto the hinges and remounted the aileron so that the gap was constant.

CLICK BOND - Adhesively bonded studs, stand offs, nut plates, cable tie supports, inserts, insulation mounts.

"The use of a slide hammer to adjust door and tailgate strikers is an industry standard method of adjustment in instances where the striker has a floating nut plate," Tesla wrote.

A plate nut, also known as a nut plate, anchor nut or anchor plate, is a stamped sheet metal nut that is usually riveted to a workpiece.

The rudder cable is going to pass very close to one of my existing nut plates so I relocated one of the plates on each of the inspection panels to give some more clearance.

The aircraft was flown for two passenger flights with the logbook error, and an FAA inspection of the plane revealed several discrepancies in the tail sections, including loose screws and a missing nut plate.

A disadvantage of the wet wing is that every rivet, bolt, nut plate, hose and tube that penetrates the wing must be sealed to prevent fuel from leaking or seeping around these hardware components.

It took us 30 minutes to adjust the rivets flush with the outside of the tube and install the first anchor nut.

The most crucial measurement of the whole exercise: The operation depends on maintaining the distance between the two dashboard mounting anchor nuts.

For AN/MS Anchor nuts go to the dedicated page.

He braced himself, firmed his grip on the rope, got ready for the sudden tension as the rope hissed through the anchor nuts.

Needle-nosed pliers are sometimes handy to pull cables taut while tightening their anchoring nuts on brakes and derailleurs.

The most popular versions have two lugs and they exist as fixed anchor nuts and as floating anchor nuts.

A plate nut, also known as a nut plate, anchor nut or anchor plate, is a stamped sheet metal nut that is usually riveted to a workpiece.

Screens": Lattice-structures of rubber- or polyurethane-mounted on both sides of a wall; anchor bars inserted into holes in the walls, helical pressure springs, and anchor nuts have a visual function and hold the parts together. "

Metallurgical examination of the nose landing gear spring rear support's four attachment bolts showed that one had failed due to bending fatigue and the remaining three had pulled from their self locking anchor nuts causing the bolt threads to strip.

The levels of the main building are marked by anchor plates.

The anchor plates are then released to be pulled along the beam.

Being visible, many anchor plates are made in a style that is decorative.

They are placed on top of the anchor plate and bolted on.

Place the anchor plate on the bolt, then thread the wing mechanism onto the end.

The bases each have an anchor plate that serves as a leveling device.

Anchor plate can be fixed to underside of desk.

Paint anchor plates and keeper bars with two coats shop prime.

Allow the fluid to dry, before attaching the next adhesive anchor plate.

Anchor plate attaches to work surface to provide additional securing option when table leg is not available.

For piles in dense sand, sensible agreement was found with earlier research on anchor plates and published field data.

Put it through the anchor plate then drive it into the fastener attached to the door.

Anchor plates are used on exterior walls of masonry buildings, for structural reinforcement.

Anchor plate was replaced on 6th November.

Certain parts, especially springs, cables, bottom brackets, and spring anchor plates, are under extreme tension.

Wall anchor plates are also known as pattress plates.

Or mount one of the adhesive anchor plates to underside of desk.

Centrifugal model tests on vertical anchor plates: Discussion.

Install anchor plates with snug fit to dasherboard frame.

However, uplift capacities in loose sand were considerably lower than previously observed for anchor plates.

Usually, the escutcheons are not bolted directly to the wall surface but are attached to anchor plates.

Any valuable equipment that has a smooth flat surface for attaching of high strength adhesive anchor plates.

Use one-and three-quarters-inch drywall screws to mount the anchor plates.

Shear reinforcement elements in the form of vertical steel bars with square anchor plates at their ends were used.