oil mist

At levels of 2500 mg/m, mineral oil mist is immediately dangerous to life and health.

Oil mists are used for very high speed applications.

In this completed project a new oil mist lubrication system has been developed and tested 2.

Serious consideration should also be given to installing dedicated oil mist detectors.

Oil mist or lubricated particles can also cause surface contamination.

The oil mist was probably ignited by a small fire that had begun at the back of the tanker, he added.

Multi-Sak filters are available with components for oil mist applications.

The old ones were letting oil mist through.

People can breathe in vegetable oil mist in the workplace.

Likewise, the presence of an oil mist in the air or an oil film on the detector window will have the same effect.

Oil mist is particularly dangerous if inhaled and can cause irreparable damage to the lungs.

They are often used for the collection of metal working fluids, and coolant or oil mists.

"The company came across on some health and safety issues, like ammonia and oil mist, which affect air quality in the plant," he said.

Surface grading for the main relief well and a 120-foot oil mist abatement structure was about to be completed.

Smaller oil droplets than oil mist are difficult to generate under normal circumstances.

Operating a medium or large speed diesel engine without a working oil mist detector is folly.

The fuel injection system was also found to be set incorrectly and the oil mist detector was not working.

Apart from lubricating bearings, oil mist also tends to have a cooling effect on bearing.

Preliminary findings indicate that the majority of exposures to oil mist were below the current occupational exposure limit.

In light of these results, on-the-man exposure sampling for oil mist was necessary to evaluate exposures to the operators.

A liquid leak or venting during a fire will produce a cloud of oil mist that is very flammable.

These can also be used in oil mist lubricating systems where specific mist control additives are not required.

The point of origin is usually a mixing valve (the oil mist generator), connected to this header.

These oil spray systems are not to be confused with the more economical oil mist systems.

The risk assessments should include a survey of the effectiveness of the detection system and its sensitivity to oil mist detection.