on-off control

Controllers, which were able to make calculated changes in response to deviations from a set point rather than on-off control, began being introduced the 1930s.

One of the simplest types of control is on-off control.

On-off control of the camcorder is simplicity itself.

The foot clutch controls forward travel while separate on-off control regulates the auger.

They are an application of the chopper principle, using on-off control of a switching device.

Electret microphone provides simple toggle on-off control or auto-switch-off function.

On-off controls are best suited for areas which are not in continuous use, such as conference rooms, bathrooms, and private offices.

The system was effectively throttled using valves, because on-off control at this frequency would have led to premature motor failure.

Watlow recently introduced a new line of microprocessor-based temperature and limit controllers for use in applications requiring basic on-off control.

An analogy to on-off control is driving a car by applying either full power or no power and varying the duty cycle, to control speed.

Microwave ovens are also avialable that contain circuitry which allows the power output to be reduced by variable rather than on-off control.

Simplicity of design and control-Machines are easily designed using standard cylinders and other components, and operate via simple on-off control.

A 2-site control system is typically used when a client is able to demonstrate ON-OFF control of two muscle groups independently.

Therefore, practical on-off control systems are designed to include hysteresis which acts as a deadband, a region around the setpoint value in which no control action occurs.

The most simple is like the thermostat that just turns the heat on if the temperature falls below a certain value and off it exceeds a certain value (on-off control).

On-off control will work where the overall system has a relatively long response time, but can result in instability if the system being controlled has a rapid response time.

Pressurized fluids, not electrons, run through them; the pathways are made of rubbery silicone, not rigid silicon; and the on-off controls are valves, not logic gates.

With respect to the "TempControl" valves, the Tribunal notes that these valves are physically separated from the on-off control of the unit of which they are a part.

Although transcriptional determination has usually been considered as a binary on-off control system, they found that the precise level of Oct-4 governs 3 distinct fates of ES cells.

A well-tuned proportional furnace temperature control system will usually be more effective than on-off control, but will still respond more slowly than the furnace could under skillful manual control.

A variety of control techniques can be demonstrated, ranging from manual operation and on-off control to the latest SCADA techniques employing PC based serial communications for distributed control.

Solenoid valves can be used for a wide array of industrial applications, including general on-off control, calibration and test stands, pilot plant control loops, process control systems, and various original equipment manufacturer applications.

This behaviour, consistent with the limit-cyclic behaviour of some nonlinear controllers, as well as the abrupt two-state nature of vasoactivity at the rat tail, provides evidence that the mechanism can be described by an on–off control model.