portal axle
portal gear

Portal axles give it an exceptionally high ground clearance.

Underneath you can see that it uses portal axles for superior ground clearance, just like the real thing.

Military 181s attain a higher ride height and lower effective gearing by using reduction boxes, a form of portal axles.

It had no portal axle at the rear, deriving its ride height instead from larger-diameter wheels.

The vehicle appears remarkably high, with huge ground clearance for its portal axles, also sourced from Mopar.

Mercedes Benz engine). 6 forward gears and 2 reverse, 4x4, portal axles with differential locks.

Both utilize tubular chassis and swing portal axles.

Off-road vehicles fitted with portal axles include:

The Pinzgauer also has portal axles like the Unimog to provide extra clearance over obstacles.

Tatra closed alliance with other companies to work on the project together; for example the Praga was supposed to deliver gear boxes and portal axle.

The cab uses conversion parts, including a new portal axle from Mopar, Chrysler's parts company.

Thus, the inverted portal axle allows the floor of the bus to be lowered, easing access to the bus and increasing the available cabin height.

Portal axles take the wheel axles below the hubs, so increase off-road manoeuvrability and ground clearance.

The vehicle uses independent suspensions and portal geared hubs similar to portal axles to make for a full 16 inches of ground clearance.

The rear axle is a portal axle, the front axle is a swing axle.

The C3 series feature portal axles with locking differentials resulting in very high ground-clearance (similar to the Unimog) and outstanding performance offroad.

Compared to normal layout, portal axles enable the vehicle to gain a higher ground clearance, as both the axle tube and differential casing are tucked up higher under the vehicle.

ITL Rigid Drive Axles PDP55 Portal Axle (With Dropbox) This page uses frames, but your browser doesn't support them.

Portal axles, a type of axles with the axle line wheel centre allows increasing the ground clearance at differential cases without corresponding increase in overall vehicle height or the center of gravity.

Portal axles (or portal gear) are an offroad technology where the axle tube is above the center of the wheel hub and where there is a reduction gearbox in the hub.

The extreme machine is fitted with portal axles to offer ultra-low gearing for sand crawling and simultaneously jack it up five inches without the need for a lift kit, 42-inch Super Swamper Bogger tires on beadlock wheels and a skid plate that runs the length of the truck.

Nobody is quite sure when, or how, the dust will settle as the competition among portals gears up and Internet use continues to climb.

The use of portal gear hub reduction, providing more torque and ride height simultaneously.

Unimogs have very high ground clearance made possible by portal gears that allow the axles and transmission to be higher than the tires' centers.

The Hummer H1 is one of the few modern vehicles fitted with inboard brakes, to accommodate each wheel's portal gear system.

The portal gears are designed as ground helical multi-mesh gears - the only way to reduce the rolling noise of the gears to a minimum.

Hummer H1s have many unusual features, such as inboard brakes and portal gears which allow the drivetrain's half shafts a higher placement, for greater ground clearance.

The portal gear configuration is also sometimes called a drop gear or drop gearset configuration (which, despite its similarity to the term dropped axle, produces the opposite effect).

Portal axles (or portal gear) are an offroad technology where the axle tube is above the center of the wheel hub and where there is a reduction gearbox in the hub.

Just like the Kübelwagen, the Schwimmwagen had portal gear rear hubs that gave better ground clearance, while at the same time reducing drive-line torque stresses with their gear reduction at the wheels.