pugmill

Also on the property is a contributing pugmill built in 1949.

It is available from the Pugmill, a craft shop.

A screening plant with a pugmill replacing the screenbox.

A pugmill may be a fast continuous mixer.

A pugmill or clay preparation plant (see below).

The cuttings must first be screened and dried, before being processes in a pugmill or similar type mixing method.

Firstly it shows a pit-horse operating the pugmill.

The original stationary steam engine, powering the pugmill, has been restored to working order and operates on open days.

Fourthly, a rough gantry, made from bush timbers, raised a type of skip to tip clay into the pugmill.

In batch plants, the fibre additive is added direct to the pugmill using individually wrapped press packs or bulk dispensing equipment.

Extruding takes place through a de-airing pugmill and clay is sealed airtight in polythene bags which can be stored indefinitely.

The "stiff" nature of RCC may require a paddle type pugmill to force the materials to mix completely and discharge easily.

Flyash Conditioning - Wetting fly ash in a pugmill to stabilize the ash so that it won't create dust.

English migrant Job Hallett began making bricks in suburban Adelaide in 1886 with a small family claypit and horse drawn pugmill.

Mixing materials at optimum moisture content requires the forced mixing action of the pugmill paddles, while soupy materials might be mixed in a drum mixer.

The ex situ treated soil was mixed with Portland cement by a pugmill then placed on top of the in situ treated soil.

The tile shed was a long, low range of wood shelving that ran out from the engine-house and pugmill, and was divided into right- and left-hand galleries.

A pugmill or pug mill is a machine in which clay or other materials are mixed into a plastic state or a similar machine for the trituration of ore.

From England he had imported a kiln capable of the high temperatures needed to make stoneware and porcelain rather than earthenware, and a Boulton's cone-driven wheel and pugmill.

A typical pugmill consists of a horizontal boxlike chamber with a top inlet and a bottom discharge at the other end, 2 shafts with opposing paddles, and a drive assembly.

The listing includes the log sales room, log turning room with attached pugmill, frame glaze room, and two kilns beneath a shelter, all built about 1921, and the house added to the complex about 1924.

However, the process used to produce this clay is not a simple one - it is ball milled, sieved, passed over rare earth magnets twice, filter pressed and pugged through a completely stainless steel pugmill before being weighed and packaged.

A continuous pugmill can achieve a thoroughly mixed, homogeneous mixture in a few seconds, and the right machines can be matched to the right application by taking into account the factors of agitation, drive assembly, inlet, discharge, cost and maintenance.

New Pugmills 7049 Horizontal pugmill 75mm extrusion Powered by a 1hp, 0.75Kw motor driving a reduction gearbox, this compact but powerful pugmill is ideal for the professional potter or busy school ceramics department.