reamer

Automatic or manual reamers can be used to correct this problem.

When properly designed and used, reamers can experience an extended service life of up to 30,000 holes.

Reamers are for cooks who like to dig in and don't mind getting messy.

Shell reamers are designed for reaming bearing and other similar items.

On burnishing drills there are 4 or more lands, similar to reamers.

Reamers should not be reversed in use as this will tend to dull the cutting edges.

Like other cutting tools, there are two categories of materials used to build reamers: heat treated and hard.

Finally, reamers must be sharpened from time to time.

For squeezing citrus fruit by hand there are large grooved reamers in green glass.

This text contains specific articles about chambering and chamber reamers.

Roller reamers are employed in boring operations for the oil & gas industry.

These core drill bits are similar in appearance to reamers as they have no cutting point or means of starting a hole.

Core drill bits differ from reamers in the amount of material they are intended to remove.

It is usually used to manufacture a variety of tools, such as drill bits, taps and reamers.

Morse taper reamers are available to alleviate minor damage.

Chamber reamers are typically made of high speed steel and require lubrication during the cutting operation.

Most reamer manufacturers will, however, produce reamers to customer specifications.

They are primarily used as roughing reamers.

Combination reamers can be made out of cobalt, carbide, or high speed steel tooling.

Major drawbacks are the scarcity of both reloading dies and chamber reamers in this format.

Reamers are used for squeezing juice from citrus such as grapefruits, lemons, limes, and oranges.

Reamers are deeply ridged egg-shaped utensils with a sharp point at one end and a handle at the other.

Chisels, planes, gauges, gouges, saws, scrapers and reamers are everywhere.

These "reamers" increase the width of the ice channel and reduce friction between the hull and ice.

These reamers are generally more durable and less expensive than floating pilot reamers.