riser tube

They explored and soon observed the openings to the riser tubes.

The steam-water mixture circulates and flows in the upward direction through the riser tubes.

If used in areas where the potable water has a high mineral content calcification of the collector riser tubes can reduce system performance.

The shorter path of water supply to the riser tubes leads to faster and more reliable operation on different loads and a quick start up.

DK Engineering had a vision to develop a steel riser tube lined with a ceramic inner and outer layer.

DK Engineering's ongoing dedication to research and improvement has positioned the company on the leading edge of ceramic steel riser tubes in the world.

The analytic results are useful in designing riser tubes and cylindrical specimens, and serve as benchmarks in further development.

The riser tubes outlet is welded to the collector headers and also directly to the drum containing steam and water .

Obstructions less than 150 mm in diameter can be circumvented by unclipping the Absorber Panel riser tubes from the Spacer Bar and spreading them around the obstruction.

The steam and water mixture enters the steam drum through riser tubes, drum internals consisting of demister separate the water droplets from the steam producing dry steam.

Number of risers 6 Riser to absorber fixing Riser tubes are secured to the absorber plate by a roll- formed backing strip, which is stitched onto the absorber plate.

A slot in the inserted section of the cold down pipe facing the riser tubes of the collector creates the flow path for the cooler jacket fluid to the bottom of the collector.