Additional examples are adjusted to the entries in an automated way - we cannot guarantee that they are correct.
Remember, your saw chain is moving in excess of 50 miles per hour.
There are special oils for 2 stroke mixes and saw chain.
Saw chains (and chainsaws generally) are used for cutting wood.
The concepts kept the saw chain products viable in the export market during a period with a strong dollar.
Here at Wright's we stock a full range of Oregon saw chain.
Just post or courier your saw chain direct to us here at "Wrights".
A chipper teeth is a variant of a saw chain used on a chainsaw.
When it is sharp, saw chain is designed to feed itself into the wood, and needs only light pressure to cut efficiently.
The majority of the improvement was generated by increased unit volumes of the Company's saw chain related products.
Gaise looked around and saw Chain Shada sitting some twenty feet to his right.
The saw chain, or "cutting chain", is a key component of a chainsaw.
Use only low kickback saw chain unless you have skills and are trained for dealing with kickback.
But in spite of better consumer spending, it was a competitive season that saw chains try to undercut each other through low prices, compromising margins.
Then he saw Chain.
He saw chains of human habitats spangling with bright pinpricks of annihilating fire.
Chainsaw mill: a chainsaw with a special saw chain and guide system for use as a rip-saw.
Carlton, located in Milwaukie, Oregon, was founded in 1963 and is a manufacturer of saw chain.
Joseph Buford Cox, inventor of chipper saw chain.
From the corner of his eye, he saw Chain's brocaded robe vanish upward onto the top of the roof over the walkway.
Inertia activated chain brake stops the saw chain instantly and reduces chance of serious injury should "kickback" occur.
Oregon saw chain maintenance and safety manual (PDF)
Blount also sells products in the construction markets and is the market leader in manufacturing saw chain and guide bars for chainsaws.
Saw chains operate by being propelled around a guide bar, removing material from the kerf by cutting chips from the side and bottom.
Oregon Saw Chain Company was founded by Joseph Buford Cox in 1947.
Oregon also produce an extensive range of saw chain files, file holders and saw chain maintenance equipment.
High power saws with aggressively cutting chains are almost impossible to protect against.
Cutting chains and associated equipment for mining and civil operations.
Use only replacement bars and cutting chains specified by the manufacturer, or the equivalent.
The saw chain, or "cutting chain", is a key component of a chainsaw.
Cutting chain comes in a large number of configurations, but these are reduced to a few key dimensions for replacement or specification purposes.
An edge slot guides the cutting chain.
For the original LPs, the mixer directly fed the custom cutting chain.
The cutting chain projected forward like the snout of a vicious boar, the tusk points gleaming.
Cutting chain can cause injury if incorrectly fitted to a chainsaw or if the saw is used improperly.
Chain brakes prevent movement of the saw's cutting chain by applying a steel brake band around the driven clutch drum.
OREGON cutting chain is used as original equipment by 90 percent of the world's chainsaw manufacturers.
Pinching the cutting chain along the top of the guide bar may push the guide bar rapidly back towards the operator.
Carry the chain saw with the engine stopped, the guide bar and cutting chain to the rear, and the muffler (exhaust) away from your body.
Tensioning mechanism - some way to adjust the tension in the cutting chain so that it neither binds on nor comes loose from the guide bar.
A bolt cutter, sometimes called bolt cropper, is a tool used for cutting chains, padlocks, bolts and wire mesh.
Chainsaw cutting chains superficially resemble roller chains but are more closely related to leaf chains.
Continuous trenching involves using a large cutting chain excavator system then using the trench box and hopper to continuously back-fill the trench with reactive media.
Use extreme caution when cutting small size brush and saplings because slender material may catch the cutting chain and be whipped toward you or pull you off balance.
Cutting chain - Usually each segment in this chain (which is constructed from riveted metal sections similar to a bicycle chain, but without rollers) features small sharp cutting teeth.
The victor is the son of John Timpson, chief executive of the Timpson shoe repair and key cutting chain, founded in 1865 in Manchester by Edward's great-great grandfather, William.
Such machines might weigh as little as ten pounds, these days, or even less, with twelve-inch bars to support the cutting chains, but they could do a surprising amount and were of course dangerous when mishandled.
Wooden or magnesium wedges should be used since they are lighter to carry and will not damage the cutting chain beyond repair if driven too deeply. They will not throw steel splinters or cause the saw to kick back.
In the case of a chainsaw this allows the chain to remain stationary whilst the engine is idling; once the throttle is pressed and the engine speed rises, the centrifugal clutch engages and the cutting chain moves.
A water supply providing at least 80 psi (5.6 bar) and at least 2 gpm (7.5 litres/min. is recommended for proper internal lubrication and cooling of the cutting bar, as well as proper lubrication, cooling and cleaning of the cutting chain.
The hero is no longer Pip but Finn, who is frolicking in the waves among the gulls when a shackled and bloodied escaped killer (Robert De Niro) erupts from the water and forces him to bring food and drink and a tool for cutting chains.