scintillation detector

Two scintillation detectors were placed next to the cadmium targets.

This was the birth of the modern scintillation detector.

Each location has four scintillation detectors which emit light when hit by charged particles.

Scintillation detectors can also be used to detect alpha- and beta-radiation.

It consists of 111 scintillation detectors, each measuring 24 square feet and a half mile apart.

Finally, their total energy was measured in a large calorimeter scintillation detector at the rear of the instrument.

They set up a radiation-measuring device called a scintillation detector about 75 feet from the spot where the lightning struck.

Scintillation detectors are generally assumed to be linear.

Pairs of photons in coincidence could be detected by the two scintillation detectors above and below the target.

Additionally the limited streamer tubes and plastic scintillation detectors are part of the measurement stations.

Scintillation detectors, on the other hand, have trouble registering the impacts of low-energy neutrons.

It uses six plastic scintillation detectors, one each on the top, bottom, back, left and right sides of the chamber, plus one in the door.

Scintillation detectors are generally preferred for hand held monitoring instruments, and are designed with a large detection window.

This covers all radiation instrument technologies, and is a useful comparative guide to the use of scintillation detectors.

This would be by means of either a scintillation detector or a semiconductor detector, placed in close proximity to the body.

Crystal tungstates are used as scintillation detectors in nuclear physics and nuclear medicine.

Instruments that measure geoneutrinos are large-size scintillation detectors.

Each site has three to four scintillation detectors with the goal of having enough sites to cover a 200 km area around the city of Seattle.

Radiation-based Gauge: Radiation is passed from a source, through the fluid of interest, and into a scintillation detector, or counter.

For dual channel detectors such as the scintillation detector it is normal to generate different sounds for alpha and beta.

Thus, better scintillator design is also in the foreground and has been the topic of pursuit ever since the invention of scintillation detectors.

Scintillation detectors uses a photo luminescent source (such as ZnS) which interacts with radiation.

Scintillation detectors are also used in the petroleum industry as detectors for Gamma Ray logs.

Scintillation detectors use crystals that emit light when gamma rays interact with the atoms in the crystals.

For example, in a scintillation detector, incident radiation excites a fluorescent material that de-excites by emitting photons of light.