seat tube

And a seat tube that extends even higher than before.

This helps to prevent water from running down the seat tube.

Angle of seat tube and whether this would suit a beginner.

The frame passes under the 950g mark with an uncut seat tube.

This of course means that the seat tube itself is no longer directly connected to the bottom bracket.

For the seat tube angle you first of all need to measure your thigh and lower leg lengths.

No, it is the fact that seat tube angle is too slack.

Conversely, an "in line" post may be required if the seat tube angle is too slack.

Also the seat tube angle is steeper than on road racing bikes.

The most common location for a second frame-mounted bottle cage is on the front side of the seat tube.

The bicycle frames were distinctive for their lack of seat tubes and chain stays.

The Gekko folds from the seat tube like an upside down umbrella.

It features his portrait on the seat tube.

If you remove the seat, be sure not to allow water to enter the seat tube shaft.

Hence designs that lack a seat tube or top tube are not allowed.

Soon the seat tube was added, creating the modern bike's double-triangle diamond frame.

Nice steep head and seat tube angles make for a quicker, livelier-feeling ride.

The forward nature of this positioning is not as easy to control as traditional seat tube angle and upright position.

In a normal riding position, turn the cranks until they line up parallel with the seat tube of the bike frame.

The seat tube contains the seatpost of the bike, which connects to the saddle.

Touring and comfort bicycles tend to have more slack seat tube angle traditionally.

C-T measures the distance from the center of the bottom bracket to the top of the seat tube.

The seat tube also may have braze-on mounts for a bottle cage or front derailleur.

In many cantilever frames the only straight tubes are the seat tube and the head tube.

An alternative solution would be to use an E-type front derailleur, which does not clamp around the seat tube at all.