Additional examples are adjusted to the entries in an automated way - we cannot guarantee that they are correct.
This can be done with silicone grease to ensure a good seal.
Then use a smear of silicone grease to keep the moisture at bay.
Silicone grease in the spring chamber can be used on a piston first stage.
The cover slides were sealed to the reservoir wells using silicone grease.
Silicone grease is insoluble in water and can be autoclaved.
You got ten layers of cloth, with a silicone grease spread between the layers.
I know some people like to use silicone grease in their higher-end German slide rules, but I've never tried this.
Silicone grease is commonly used for lubricating and preserving rubber parts, such as O-rings.
Corrosion resistance can be improved by coating all bare copper wires with silicone grease.
Surfaces of both the component and heat sink must be clean, with no residue such as a film of silicone grease.
A very thin layer of silicone grease between the accelerometer and mounting surface is recommended for good high frequency responses.
The housing could be packed with silicone grease or jelly to exclude air and reduce the mobility of any water which may accidentally enter.
Check the batteries once a week and lubricate the o-rings with silicone grease or spray before closing the flashlight.
Additionally, silicone grease does not swell or soften the rubber, which can be a problem with hydrocarbon based greases.
Silicone greases are used for many purposes, such as bicycle chains, airsoft gun parts, and a wide range of other mechanisms.
A common modification is the addition of viscous silicone grease to the spring, which both lubricates it and dampens vibration.
O-rings and Silicone Grease Good maintenance protects your investment.
Electrical utilities use silicone grease to lubricate separable elbows on lines which must endure high temperatures.
Polyphenyl Ether, rather than silicone grease, is the active ingredient in some such connector lubricants.
Clean the ball if it is dirty and lubricate it with a dab of petroleum jelly or silicone grease.
Special versions of silicone grease are also used widely by the plumbing industry in faucets and seals, as well as dental equipment.
A special silicone grease is also applied to the gaskets to stop them nipping and breaking when the crown is turned or case back fastened.
Silicone grease is a waterproof grease made by combining a silicone oil with a thickener.
Using this formulation, silicone grease is a translucent white viscous paste, with exact properties dependent on the type and proportion of the components.
Thermal grease often consists of a silicone grease base, along with added thermally conductive fillers.