spinning machine

Even in the modern day, many spinning machines are based on this principle.

"About 300 to 500 spinning machines were inefficient," he said.

In 1953, the last glass-roller spinning machine was turned off.

They produced the first ever roller spinning machine but it was not successful.

A carpenter by trade he began work in Birmingham on the development of a spinning machine.

Here he was put to operate a spinning machine.

A ring spinning machine is developed in the United States.

He reconstructed a spinning machine from memory and built a factory of his own.

Only 4 of the new high-speed melt spinning machines were installed.

In 1916, the first staple filament spinning machine was put into operation.

The business flourished and after a short time it took on the manufacture of complete spinning machines.

Today most of the spinning machines have been motorized.

A pedal-powered spinning machine that shoot riders into the air.

As early as 1900, a hall accommodating 18 spinning machines was opened.

From 1927 to 1938 the plant was designed and built the country's first spinning machines, created a new base of textile machinery.

One new product was production of spinning machines.

There is an image of a silk spinning machine powered by a water wheel that dates to 1313.

In 1785, he purchased several spinning machines that had been developed by James Hargreaves.

In 1968, it was equipped with the first open-end spinning machines in England.

The spinning machine was draining the local grid on which all machines fed, turning the energy into heat and noise.

A sheet metal blank is placed between the mandrel and the chuck of the spinning machine.

All these inventions were intended for the registration and improvement of the running of the spinning machines.

He rebuilt the mill to hold four or five water-powered spinning machines, each with 50 spindles.

Richard Arkwright's water frame spinning machine enabled the weaving of whole cotton goods for the first time.

Reductions in personnel costs (simpler preparation as the material passes directly from the card to the spinning machine).