through bolt

The deck is through bolted to the hull.

Key to this was the 'layer cake' construction of the new engine, held together by its long through bolts.

Some designs, such as the US Hercules, achieve this by using long through bolts.

Some wall anchors are corrosion-resistant, and through bolts are available which work in the same way as frame plugs.

This second advantage is usually only possible with blind bolts, as the dowel effect of a through bolt is less effective.

By comparison, the V6 engines are more conventional engines that do not make use of the through bolts to hold the head to the block.

They made him want to paw through bolts of fabric to find a match, to drag out his dressmaker's dummy and pins.

"The lance conducts every range of light, from visible luminescence in all colors through bolts of lightning to gravity waves.

If firefighters have the time, they will try to open locks, but when timing is critical, they will force their way through bolts and cut through bars.

The hull-flange is through bolted to the deck at 6in (150mm) centres and bonded with 3M 5200 adhesive/sealant.

Bolt pullout tests were also performed at UHM to validate the strength of the masonry with through bolts.

After officials deemed his original story too sensitive to run in the school paper, Mr. Holovaty beamed it to students worldwide through Bolt Reporter.

If slip-critical connections fail (by slipping), they revert to bearing-type connections, with structural forces now transferred through bolt shear and connection plate bearing.

Note that the column is braced with steel adjustable 'formwork props' and uses 20 mm 'through bolts' to further support the long side of the column.

BOLT enables the user to back up favorites to the device's memory and restore them back through BOLT directly.

"They said I had to have $10,000 before I could get a loan," Ms. Bates said as she whisked through bolts of cotton and rayon prints.

In large timbers such as these the scarf is virtually always secured with through bolts, and is frequently reinforced externally with iron or steel fishplates, and/or strapping.

Quickdraws (also known as extenders) are climbing equipment used by rock and ice climbers to allow the climbing rope to run freely through bolt anchors or other protection while leading.

These bolts may be either a single through bolt passing through the crankcase from one side to the other, or else two blind bolts threaded into the bearing cap from each side.

And whenever Mr. Anthony reaches for a new pack of Carlton 100's, he snips the top off with an oversized pair of scissors intended for cutting through bolts of fabric.

Chainplate - A strip of strong metal, often stainless steel,through bolted to the topsides and a frame and protruding above deck level to take the load of a stay in a sail boat.

The gusset plate is welded to a beam and then two or three columns, beams, or truss chord are connect to the other side of the gusset plate through bolts or welds.

The ones where ironworkers are jamming their spud wrenches through bolt holes, as they cajole massive steel beams into position, are mostly office buildings, such as the a 44-story project at 1532 Broadway and 45th Street.

Grab rail- a length of strong wood, often mahogony, or stainless steel tube,with short legs, through bolted to a cabin top, so that crew making their way forward on a sloping and wet side deck have a firm hand hold.

He drew near and told me that through the power of his magic arts he had caused the soft music to waken me, and had made his way through bolts and bars to offer me his hand and heart.