Additional examples are adjusted to the entries in an automated way - we cannot guarantee that they are correct.
Cause oil and gas to flow to the wellbore easily.
For the wellbore, a resolution of 1 mm is necessary.
Creating a channel between the pay zone and the wellbore.
The pressure in the wellbore must also exceed the rock matrix strength.
Each hole section of a wellbore requires different fluid properties.
And finally the wellbore pressure must be greater than one of the three principal stresses in the formation.
Current wellbore pressure at a 20% delivery rate is approximately 500 psi.
It originally was designed to test the potential of the deeper Xu-2 through a horizontal wellbore.
Many wellbore conditions increase the likelihood of swabbing on a trip.
With less pressure at the bottom of the wellbore, it is easier for the drill bit to cut and remove rock.
Obviously the faster the wellbore reaches required total depth, the lower the overall cost.
If we find oil, we will test at what rate it flows from the ground into the wellbore.
In order to improve resolution within a wellbore, acoustic response will be analyzed.
This will require a pressure in the wellbore greater than formation pressure.
In effect, a riser extends the wellbore to the rig.
Allow controlled volumes of fluid to be withdrawn from the wellbore.
It is also the first attempt to produce from more than one coal seam in the same wellbore.
Mechanical preparation of the wellbore for the production test will commence immediately.
While drilling an oil or gas well, the top of the wellbore is lined with a casing.
• Effective planning, intervention and state of the art wellbore simulation software.
Project description This project will build a physical model of a wellbore in the laboratory.
It is used to spot pills and plugs at various depths in the wellbore.
The moderate flow rate seems to be caused by limited communication between the reservoir and the wellbore.
Centralizers can help keep the casing centered in the wellbore.
Well control means no uncontrollable flow of formation fluids into the wellbore.