Additional examples are adjusted to the entries in an automated way - we cannot guarantee that they are correct.
The parts of the wheel cylinder are shown to the right.
The wheel cylinder used to be made of cast iron.
A wheel cylinder is a component in a drum brake system.
Two pistons operate the shoes, one at each end of the wheel cylinder.
All the wheel cylinders and the master cylinder are resized.
That long wheeled cylinder could be nothing else.
This has the effect of bypassing the wheel cylinder and controlling the brakes directly.
Wheel cylinders must be rebuilt or replaced if they show signs of leaking.
When a driver steps on the brake pedal, a stream of fluid is sent to the wheel cylinders.
One wheel cylinder operates the brake on each wheel.
The wheel cylinders are usually connected to the shoes with small bird-beak shaped rods.
The wheel cylinder consists of a cylinder that has two pistons, one on each side.
The discs spread apart to create friction against the inner drum surface through the action of standard wheel cylinders.
For press fitting of master cylinder sleeves as well as some slave and wheel cylinders.
Conversely, if your car suffers from rear brake lock up, you can consider smaller bore wheel cylinders.
Physically, Troubot was a wheeled cylinder with append- ages.
Finished stripping out the wheel cylinders and start fixing the wiring harness before knocking off for the day.
Some designs have two wheel cylinders.
All the application force of the wheel cylinder is applied through the web to the lining table and brake lining.
Brake system pressure then acts on the pistons in the calipers and/or wheel cylinders to apply the brakes.
When were yours last checked - Includes: Replace rear brake shoes and wheel cylinders.
The master and all wheel cylinders were stainless sleeved and new lines were made.
Examples include plastic brake wheel cylinder pistons, which tended to swell and bind up the brakes after a some years in service.
Brake actuators (including spring brakes or hydraulic wheel cylinders)
Front wheel cylinders for the Giulia 101 series cars fitted with triple shoe front brakes.