solderable

It is designed for applications where both a high thermal rating and a solderable product are required.

Storage temperature had a marked effect, and samples kept in a freezer were still solderable after 13 weeks.

Nickel with more than 8% phosphorus is not solderable .

Titanium cannot be soldered without first pre-plating it in a metal that is solderable.

They also have good tarnish and corrosion resistance and are readily solderable.

Linear polyester imide resin based film for solderable applications.

Other tags can have a reed switch fitted as an option, but are otherwise supplied with solderable 'start-up' wires.

Tantalum is not solderable.

The only way that the final category of metals can be soldered is by pre-plating them in a metal that is solderable.

Mostly jumpers - means points tapped are wire jumpers and are generally the easiest solderable points.

The places to which components will be mounted are typically plated, because untreated bare copper oxidizes quickly, and therefore is not readily solderable.

Machine solderable terminal to P.C.B connections.

Automotive-Qualified IGBT features solderable front metal.

The HASL finish prevents oxidation from the underlying copper, thereby guaranteeing a solderable surface.

For high-frequency work a grounded solderable metallic base such as the copper side of an unetched printed circuit board can be used as base and ground plane.

Electroless nickel plating layers are not easily solderable, nor do they seize with other metals or another electroless nickel plated workpiece under pressure.

It is common practice for boards to include "prototyping areas", areas of the board already laid out as a solderable breadboard area with the bus and power rails available, but without a defined circuit.

The fatigue responses of solderable thick-film conductors have been investigated and it has been shown that a model may be developed to predict the fatigue life of Ball Grid Arrays soldered pads.

Some activators may also contain metal ions, capable of exchange reaction with the underlying metal; such fluxes aid soldering by chemically depositing a thin layer of easier solderable metal on the exposed base metal.

Diode D1 is also mounted on a small heatsink so that its two pins go through to the appropriate foil points and the 'sink itself, which has solderable pins, is mounted vertically and fitted to the holes 'E-E'.

For high-frequency development, a metal breadboard affords a desirable solderable ground plane, often an unetched piece of printed circuit board; integrated circuits are sometimes stuck upside down to the breadboard and soldered to directly, a technique sometimes called "dead bug" construction because of its appearance.